Brother International Simplicity SB3129 Users Manual - English - Page 124
Changing the stitch, density, Changing the pattern length
View all Brother International Simplicity SB3129 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
UTILITY STITCHES Changing the stitch density If a decorative satin stitch has been selected, the stitch density can be changed. Select a decorative satin stitch . 1 Press (settings key) in the operation panel. 2 X The settings screen appears. Press , , and (arrow keys) until 3 is selected. Changing the pattern length The length of one part of a satin stitch can be set to one of five sizes. Select a satin stitch . 1 Press (settings key) in the operation panel. 2 X The settings screen appears. Press , , and (arrow keys) until 3 is selected. Press 4 (OK key). X The screen for specifying the stitching density of the decorative satin stitch appears. Press and until the desired density is 5 selected. Select for coarser stitching or select for finer stitching. Press 4 (OK key). X The screen for changing the length of a satin stitch appears. Press and until the desired ratio is 5 selected. The length can be set within the range of and . Press 6 (OK key). X The initial stitch screen appears again, and the stitching density is changed. CAUTION ● If the stitching density is too fine, depending on the needle, the stitches may be bunched together, causing the needle to break. X The satin stitch length is changed. Press 6 (OK key). X The initial stitch screen appears again. 118