Brother International Simplicity SB3129 Users Manual - English - Page 29
Reattach the bobbin cover.
View all Brother International Simplicity SB3129 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
While lightly holding down the bobbin with 7 your right hand as shown, guide the thread through the slit (1 and 2). • At this time, check that the bobbin easily rotates counterclockwise. Then, pull the thread toward you to cut it with 1 the cutter (3). 1 Slit 2 Cutter (Cut the thread with the cutter.) Reattach the bobbin cover. 8 Insert the tab in the lower-left corner of the bobbin cover, and then lightly press down on the right side. 2 1 X The lower threading is finished. Next, thread the upper thread. Continue with the procedure in "Upper Threading" (on the next page). Memo ● You can begin sewing without pulling up the bobbin thread. If you wish to pull up the bobbin thread before starting to sew, pull up the thread according to the procedure in "Pulling up the bobbin thread" (page 31). Winding/Installing the Bobbin 23