Brother International Simplicity SB3129 Users Manual - English - Page 65
Automatically cutting the, thread
View all Brother International Simplicity SB3129 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Automatically cutting the thread Press to select . 6 To return to , press . The sewing machine can be set to automatically cut the threads at the end of the stitching. This is called "programmed thread-cutting". If programmed thread-cutting is set, automatic X The machine is now set for programmed reverse/reinforcement stitching is also set. This thread-cutting. setting is convenient if a stitch for sewing buttonholes or bar tacks is selected. Press 7 (OK key). 2 Turn on the sewing machine. 1 X The initial stitch screen appears again, and appears in the lower-left corner of the screen. X The LCD comes on. Select a stitch. 2 • When the sewing machine is turned off, the programmed thread-cutting setting is cancelled. Position the fabric under the presser foot, and 8 then press (start/stop button) once. • For details on selecting a stitch, refer to "Selecting stitching" (page 68). Press 3 (settings key) in the operation panel. X The settings screen appears. Press , , and (arrow keys) until 4 is selected. Press 5 (OK key). X The screen for specifying automatic threadcutting appears. 1 1 Start/stop button X After reverse/reinforcement stitches are sewn, the machine starts sewing. After reaching the end of the stitching, press 9 (reverse/reinforcement stitch button) once. This step is not necessary if a stitch such as those for sewing buttonholes and bar tacks is selected where reinforcement stitches are automatically sewn. Useful Functions 59