Brother International Simplicity SB3129 Users Manual - English - Page 21

■ List of stitch or machine attribute The stitch or machine attribute that can be set are listed below. For details on each attribute, refer to the corresponding reference page. Attribute Icon Details Reference Automatic 1 reverse/ reinforcement Specifies automatic reverse/reinforcement stitching. page 57 stitching Automatic threadcutting Specifies automatic thread-cutting. page 59 Check pattern Allows combined patterns to be checked. page 116 Left/right mirror imaging Mirror images patterns along a vertical axis. page 119 Pattern length Adjusts the length of satin stitches. page 118 Pattern size Repeated/ single sewing Sets the size of patterns to be large or small. page 117 Specifies whether the pattern will be sewn once or repeatedly. page 115 Stitching density Specifies the sewing density of the stitching. page 118 Save settings Allows adjusted pattern widths and lengths to be saved. page 60 Needle position Specifies where the needle is positioned when the sewing machine is stopped. page 16 Twin needle sewing Specifies the twin needle. page 28 Stitch width control Allows the stitch width to be adjusted with the sewing speed controller. page 98 Language Allows the language used in the screens to be changed. page 17 Buzzer Specifies whether or not a beep is sounded with each operation. page 143 LCD brightness Vertical pattern adjustment Adjusts the brightness of the LCD. page 16 Adjusts the up and down position of the pattern. page 121 Changing the Machine Settings 15