Brother International LX2500 Users Manual - English and Spanish - Page 17
Drawing up the lower, thread - threading
View all Brother International LX2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Put the thread behind the guide above the 8 needle. Drawing up the lower • The thread can easily be passed behind the needle bar thread guide by holding the thread 1 thread in your left hand, then feeding the While lightly holding the end of the upper thread with your right hand. 1 thread, slowly turn the handwheel toward you (counterclockwise) by hand to lower and then raise the needle. 1 1 Needle bar thread guide Pull on the upper thread to draw up the 2 lower thread. Thread the needle from front to back 9 leaving a thread tail of about 5 cm (2 inches). 1 1 5 cm (2 inches) 1 2 1 2 1 Upper thread 2 Lower thread Pull out about 10 cm (4 inches) of both 3 threads and put them toward the back of the machine under the presser foot. Note ● Make sure you raise the presser foot lever and the thread take-up lever before you feed the upper thread. ● If you incorrectly feed the thread you may cause sewing problems. 1 2 1 Upper thread 2 Lower thread 16