Brother International LX2500 Users Manual - English and Spanish - Page 43
Stitches are, skipped., The stitch is, not sewn, correctly., The fabric, does not feed. - bobbin race
View all Brother International LX2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Symptom Stitches are skipped. The stitch is not sewn correctly. Possible cause You have not threaded the upper thread properly. You have not used the right combination of fabric, thread and needle. The needle is bent or blunt. The needle is incorrectly installed. Dust has accumulated under the needle plate or in the bobbin case. The presser foot that you are using is not correct for the type of stitch. The thread tension is incorrect. The thread is tangled. The darning plate is fitted on the needle plate. The fabric does not feed. You have not used the right combination of fabric, thread and needle. The thread is tangled, for example, in the race. The presser foot you are using is not appropriate for the type of stitch that you want to sew. How to put it right Correct the upper threading. Choose a thread and needle that are appropriate for the type of fabric. Replace the needle. Correctly install the needle. Remove the needle plate and clean the plate and the bobbin case. Attach the presser foot that is correct for the type of stitch that you want to sew. Adjust the tension of the upper thread. Remove the tangled thread. If the thread is tangled in the bobbin case, clean the bobbin case. Remove the darning plate. Choose a thread and needle that are appropriate for the type of fabric. Remove the tangle thread. If the thread is tangled in the race, clean the race. Attach the presser foot that is correct for the type of stitch that you want to sew. Page 14 17 7 7 38 - 22 38 - 17 38 30 6 42