Canon EOS Digital Rebel XT EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 78
Selecting the Drive Mode
View all Canon EOS Digital Rebel XT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
i Selecting the Drive Mode Single and continuous drive modes are provided. In the Basic Zone modes, the optimum drive mode is set automatically. Press the button. ¡ Look at the LCD panel and press the button to select the drive mode. u : Single shooting When you press the shutter button completely, one shot will be taken. i : Continuous shooting (Max. 3 shots per sec.) While you press the shutter button completely, shots will be taken continuously. Q : Self-timer/Remote control (p.48/49) ¡ During continuous shooting, the captured images are first stored in the camera's buffer memory and then successively transferred to the CF card. When the Max. Burst buffer memory becomes full during continuous shooting, "buSY" will be displayed on the LCD panel and in the viewfinder and the camera cannot take any more shots. As the captured images are transferred to the CF card, you will be able to capture more images. Press the shutter button halfway to check in the viewfinder's bottom right the current remaining shots of the maximum burst. ¡ If "FuLL CF" is displayed in the viewfinder and on the LCD panel, wait until the access lamp stops blinking, then replace the CF card. ¡ When the battery level is low, the maximum burst will be slightly lower. 78