Canon EOS Elan II EOS ELAN II Instruction Manual - Page 59

The image was removed due to copyright restrictions The image was removed due to copyright restrictions dEP 2 .0) :25 15 IV. Crea-tiv-e Zone Modes 4 Aim the same focusing point at the farthest point youyant in focus and press and release the shutter button. This is dEP point 2. • The in-focus indicator lights and dEP (dEP 2) is displayed in the viewfinder and on the LCD panel. • You can also specify dEP points 1 and 2 in reverse order. 5g Compose the picture and press the shutter button halfway to check the shutter speed and aperture setting. • When you release the shutter button, dEP (dEP) and the aperture setting will be displayed. • The exposure is set immediately before the shutter is released. 6 Press the shutter button completely to take the picture. Depth-of-field AE with an Automatically-Selected Focusing Point If the focusing point selection is automatic, only the center focusing point can specify the two dEP points and achieve focus. The basic procedure is the same as for "Depth-of-field AE with a Manually-Selected Focusing Point." $J Depth-of-field AE with an Eye-Selected Focusing Point You can set the two dEP points with the focusing point selected by your eye. After setting the two dEP points, press the shutter button halfway to meter° the area around the eye-selected focusing point. If you press the shutter button halfway while you are not looking at a focusing point, the center focusing point will be activated automatically and evaluative metering will be used. The basic procedure is the same as for "Depth-offield AE with a Manually-Selected Focusing Point." • The metering mode is set with the metering mode lever. When partial metering is set and Custom Function C08 is set to 1, partial metering will be linked to the eye-selected focusing point. See page 81. 59