Canon FAXPHONE L90 Starter Guide FAXPHONE L90 - Page 11
Connect the Power Cord - check document
UPC - 013803082029
View all Canon FAXPHONE L90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Set Up the Machine Connect the Power Cord 1 Connect the power cord into the rear socket on the back side of the machine and the wall outlet. 2 The machine enters the standby mode. Ex. 12/31/2007 MON 15:50 FaxOnly STANDARD ˔ The LCD display turned off: The machine may enter the sleep mode while you are setting up the machine. Press [Energy Saver] to turn the machine back on and continue the setup. ˔ is displayed: Make sure that the toner cover and scanning platform are closed properly. (See "Install Toner Cartridge," on p. 5.) ˔ is displayed: Check the installation of the toner cartridge and the placement of the paper. (See "Install Toner Cartridge," on p. 5 and "Load Paper," on p. 7.) Any data stored in the memory, including received fax documents, will be deleted if you unplug the power cord from the machine.