Canon LASER CLASS 650i Basic Operation Guide - Page 128
Cleaning the Machine, Cleaning the Exterior, Cleaning the Fixing Unit
View all Canon LASER CLASS 650i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Cleaning the Machine Cleaning the Exterior Clean the exterior of the machine and ventilation slots. 1 Turn OFF the power switch and disconnect the power cord. 2 Clean the exterior of the machine with a soft, well wrung out cloth dampened with water or mild detergent diluted with water. 3 Select using [ ] or [ ] and press [OK]. Adjustment/Maintenance Toner Saver Mode Black Text Processi... Special Processing Clean Fixing Unit 4 Check if the supported paper is set in the paper drawer and press [OK]. 3 Wait for the machine to dry completely before reconnecting the power cord, and then turn ON the power. Cleaning the Fixing Unit The fixing unit may be dirty under the following conditions. In such case, clean the fixing unit. • When black streaks appear on the output • When the toner cartridge is replaced Keys to be used for this operation Menu Supported Paper: Size: A4, LTR Type: Plain, Plain L OK 5 Check the procedure shown in the display and press [OK]. * The cleaning paper will be printed. Steps (Stare:Press OK) 1. Print Clean. Sheet 2. Start Cleaning 6 Load the cleaning paper to the multi-purpose tray with the black band side up. Maintenance OK 1 Press [ ] (Menu). 2 Select using [ ] or [ ] and press [OK]. Menu Scan Settings USB Direct Print Se... Printer Settings Adjustment/Maintenan 7 Check the screen and press [OK]. The cleaning begins. It takes approximately 80 seconds to complete the process. Place the cleaning sheet with the print face up in the mulchpurpose tray, and press OK. * We recommend that plain paper be loaded when cleaning the fixing unit. When the cleaning does not start You cannot use this function when jobs are stored in memory. 8 Press [ ] (Menu) to close the menu screen. 8-2