Canon LASER CLASS 650i Basic Operation Guide - Page 66
Copying by Saving Paper
View all Canon LASER CLASS 650i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Copying Copying by Saving Paper Press [ ] (Paper Save Copy) to save paper when making a copy. Choose one of the following four combinations of 2 on 1/4 on 1 and 2-Sided copy settings, as shown in the table below. N on 1 2-Sided Select Layout Format Original Original Settings Orientation Format 2 on 1 1->2-Sided 1->2-Sided Portrait Book Type 4 on 1 1->2-Sided 1->2-Sided Portrait Book Type 2 on 1 1->1-Sided OFF 4 on 1 1->1-Sided OFF IMPORTANT Precautions on 2-Sided Copying • Do not touch your document when making 2-sided copying until the process is complete. After copying on the front side is complete, the document is partially output, reserved, and fed into the machine again for copying on the back side. • Be sure to close the paper switch cover before making 2-sided copying. Keys to be used for this operation Paper Save Copy OK Start 1 Set the paper switch lever correctly to fit the size of paper used for 2-sided copying. * If the lever is not set correctly, sheets may not be fed properly, or paper jams may occur. (1) Open the lower rear cover. (2) Set the blue-colored paper size switch lever (A) correctly. • A4: Pull forward • Letter and legal: Push towards the far end (A) (A) 2 Place your document. "Placing Documents" (→P. 2-4) "Supported Document Types" (→P. 2-2) 3 Press [ ] (Paper Save Copy). 4 Select the combination that you want to use using [ ] or [ ] and press [OK]. Paper Save Copy 2 on 1 1 2-Sided 4 on 1 1 2-Sided 2 on 1 1 1-Sided 4 on 1 1 1-Sided 5 Select the document size using [ ] or [ ] and press [OK]. Scan Size LTR LGL STMT 6 Press [ ] (Start). When the document is placed on the platen glass (1) Place the next page and press [ ] (Start). * Repeat this step until all pages are scanned. Scan Next: Press Start SheetxCopy:1x1/1 Density: +-0 (2) Select using [ ] or [ ] and press [OK]. 3-10