Canon PIXMA MX350 Network Setup Troubleshooting

Canon PIXMA MX350 Manual

Canon PIXMA MX350 manual table of contents:

  • Canon PIXMA MX350 | Network Setup Troubleshooting - Page 1
    Network Setup Troubleshooting
  • Canon PIXMA MX350 | Network Setup Troubleshooting - Page 2
    Network Setup Troubleshooting This manual mainly describes problems you may encounter when setting up a network, and the possible causes and ... for your problem or if you encounter a problem after setup, refer to the onscreen manual: Basic Guide/Advanced Guide. Screens are based on ...
  • Canon PIXMA MX350 | Network Setup Troubleshooting - Page 3
    ... configure settings of the machine, refer to "Wireless Setup Using Easy Setup" in the printed manual: Getting Started. Enable SSID broadcast (connection via "... devices by saving the MAC addresses of specific wireless devices (computers, printers, etc.) to the access point beforehand....
  • Canon PIXMA MX350 | Network Setup Troubleshooting - Page 4
    ... of the access point, or select a WEP key number by entering wireless connection settings of the machine directly. • For details on how to change...manufacturer. • For details on how to select a WEP key number by entering wireless connection settings of the machine directly, refer to "Entering the ...
  • Canon PIXMA MX350 | Network Setup Troubleshooting - Page 5
    .../network name (SSID) correct? When you have only one access point Select Use one... OK button, then proceed with the setup from in "Entering the Access Point's Wireless LAN Settings Directly on... OK button, then proceed with the setup from in "Entering the Access Point's Wireless LAN Settings Directly ...
  • Canon PIXMA MX350 | Network Setup Troubleshooting - Page 6
    ..., press the OK button, then proceed with the setup from in "Entering the Access Point's Wireless LAN Settings Directly on the Machine" ... from unauthorized wireless devices by saving the MAC addresses of specific wireless devices (computers, printers, etc.) to the access point beforehand. Enable the ...
  • Canon PIXMA MX350 | Network Setup Troubleshooting - Page 7
    ...machine, refer to "Wireless Setup Using WPS (Wi-Fi Protected Setup)" in the printed manual:... to configure settings of the machine manually, refer to "Wireless Setup" in the printed manual: Getting Started.... the procedures in "Wireless Setup" and onward or "Wired Setup" and onward in the printed manual...
  • Canon PIXMA MX350 | Network Setup Troubleshooting - Page 8
    ... A function to prevent communication between multiple wireless devices (such as computers and printers) connected to an access point. If the ... setup again by following the procedures in "Wireless Setup" and onward or "Wired Setup" and onward in the printed manual: Getting Started. Check 3 Is the IP ...
  • Canon PIXMA MX350 | Network Setup Troubleshooting - Page 9
    ...settings of the network device, refer to the manual supplied with the network device or contact its manufacturer. Check 5 (* Wireless connection only) The Machine...A function to prevent communication between multiple wireless devices (such as computers and printers) connected to an access point. 
  • Canon PIXMA MX350 | Network Setup Troubleshooting - Page 10
    ... Assignments" on the right. • To enter characters assigned to the same key successively (e.g., enter "N" then "O"), press the ] button (B) to move the cursor by one character to the right first. • To insert a space, move the cursor to the target position using the [ or ] button (B), then press ...
  • Canon PIXMA MX350 | Network Setup Troubleshooting - Page 11
    Entering the Access Point's Wireless LAN Settings Directly on the Machine 6 Select Directly enter the... Setup button. 2 Use the [ or ] button to select Wireless LAN Setup, then press the OK button. ... Select Yes, then press the OK button. • When wireless connection is enabled, the Wi-Fi lamp lights...
  • Canon PIXMA MX350 | Network Setup Troubleshooting - Page 12
    ... case sensitive. 2 Make sure that the network key is correct, then press the OK button. Go to . 3 Make sure that the network key is correct, then press the OK button. Go to . 11 When the completion screen appears, press the OK button. The Setup menu screen returns. Press the COPY button. 0
  • Canon PIXMA MX350 | Network Setup Troubleshooting - Page 13
    ... Yes, then press the OK button. 8 Select Manual setup, then press the OK button. ... the procedures in "Wireless Setup" and onward or "Wired Setup" and onward in the printed manual:... instructions to proceed with settings. • When the setup is complete, press the COPY button. Wireless ...
  • Canon PIXMA MX350 | Network Setup Troubleshooting - Page 14
    ... may appear on the computer monitor warning that Canon software is attempting to access the network. If ... 4 When using a wireless connection, is the Wi-Fi lamp (A) lit blue? Press the Setup button,... again by following the procedures in "Wireless Setup" and onward in the printed manual: Getting Started...
  • Canon PIXMA MX350 | Network Setup Troubleshooting - Page 15
    ... connection, is wired LAN enabled? Perform setup by following the procedures in "Wired Setup" and onward in the printed manual: Getting Started. Check 8 When using a router, are the Ethernet cables of the printer and computer connected to the LAN side of ...
  • Canon PIXMA MX350 | Network Setup Troubleshooting - Page 16
    QT5-2855-V01 XXXXXXXX ©CANON INC.2010 PRINTED IN XXXXXXXX



Type your new search above

The manual viewer requires the flash plugin to be installed and enabled.
To view this page ensure that Adobe Flash Player version 10 or greater is installed.

Canon PIXMA MX350 Manual