Canon PowerShot A630 PowerShot A640/A630 Camera User Guide Camera User Guide A - Page 105
Image contains noise., White dots appear on the image., Eyes appear red. - troubleshooting flash
View all Canon PowerShot A630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Image contains noise. ISO speed is too high. z Higher ISO speeds or may increase image noise. For higher image quality, use as low an ISO speed as possible (p. 69). z In , , , , and modes in the mode, the ISO speed increases and noise can appear. White dots appear on the image. Light from the flash has z This is a phenomenon that occurs reflected off dust particles with digital cameras and does not or insects in the air. This is constitute a malfunction. particularly noticeable when shooting using the wide angle or when you increase the aperture value in the mode. Eyes appear red. Light is reflected back from z Shoot with the red-eye reduction the eyes when the flash is function set to On (Basic Guide used in dark areas. p. 15). For this mode to be effective, the subject must be looking right at the red-eye reduction lamp. Try asking them to look directly at the lamp. z Even better results can be obtained by increasing the lighting in indoor settings or approaching closer to the subject. The shutter will not activate for approximately 1 second after the red-eye reduction lamp fires in order to improve the effect. Troubleshooting 103