Canon PowerShot SX280 HS User Guide - Page 137

• You can connect to computers that you have already connected to by choosing them on the [Select a Device] screen in step 3. • If you chose [PIN Method] in step 5, a PIN code will be displayed on the screen. Be sure to set this code in the access point. Choose a device in the [Select a Device] screen. For further details, refer to the user guide included with your access point. • To add multiple computers, repeat the above procedures starting from step 1. • To disconnect from the camera, turn off the camera. • When accessing the Wi-Fi menu from the second time by pressing the button, the most recently connected device will be displayed first, allowing you to easily select it for connection. To add a new device, display the device selection screen by pressing the buttons, and then configure the setting. Connecting to Access Points in the List 1 View the listed access points. zzView the listed networks (access points) as described in steps 1 - 3 of "Adding a Computer" (=135). 2 Choose an access point. zzPress the buttons or turn the dial to choose a network (access point), and then press the button. 3 Enter the access point's encryption key. zzPress the button to access the keyboard, and then enter the encryption key (=134). zzPress the buttons or turn the dial to choose [Next], and then press the button. 4 Choose [Auto]. zzPress the buttons or turn the dial to choose [Auto], and then press the button. XXA list of other devices connected to the access point will appear in the [Select a Device] screen. Cover Preliminary Notes and Legal Information Contents: Basic Operations Basic Guide Advanced Guide 1 Camera Basics 2 Using GPS Function 3 Auto Mode/ Hybrid Auto Mode 4 Other Shooting Modes 5 P Mode 6 Tv, Av, and M Mode 7 Playback Mode 8 Wi-Fi Functions 9 Setting Menu 10 Accessories 11 Appendix Index 137