Canon PowerShot SX280 HS User Guide - Page 151
Power-Saving Adjustment, Lens Retraction Timing, Using Eco Mode
View all Canon PowerShot SX280 HS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Lens Retraction Timing The lens is normally retracted for safety about one minute after you press the button in Shooting mode (=32). To have the lens retracted immediately after you press the button, set the retraction timing to [0 sec.]. zzChoose [Lens Retract], and then choose [0 sec.]. Using Eco Mode This function allows you to conserve battery power in Shooting mode. When the camera is not in use, the screen quickly darkens to reduce battery consumption. 1 Configure the setting. zzChoose [Eco Mode], and then choose [On]. XX[ ] is now shown on the shooting screen (=179). XXThe screen darkens when the camera is not used for approximately two seconds; approximately ten seconds after darkening, the screen turns off. The camera turns off after approximately three minutes of inactivity. 2 Shoot. zzTo activate the screen and prepare for shooting when the screen is off but the lens is still out, press the shutter button halfway. Power-Saving Adjustment Adjust the timing of automatic camera and screen deactivation (Auto Power Down and Display Off, respectively) as needed (=32). zzChoose [Power Saving], and then press the button. zzAfter choosing an item, press the buttons to adjust it as needed. • To conserve battery power, you should normally choose [On] for [Auto Power Down] and [1 min.] or less for [Display Off]. • The [Display Off] setting is applied even if you set [Auto Power Down] to [Off]. • These power-saving functions are not available when you have set Eco mode (=151) to [On]. Cover Preliminary Notes and Legal Information Contents: Basic Operations Basic Guide Advanced Guide 1 Camera Basics 2 Using GPS Function 3 Auto Mode/ Hybrid Auto Mode 4 Other Shooting Modes 5 P Mode 6 Tv, Av, and M Mode 7 Playback Mode 8 Wi-Fi Functions 9 Setting Menu 10 Accessories 11 Appendix Index 151