Canon PowerShot SX280 HS User Guide - Page 171

Connection status of Eye-Fi cards in the camera can be checked on the shooting screen (in regular information display mode) or playback screen (in simple information display mode). (Gray) Not connected Interrupted (Blinking white) Connecting (White) Connected (Animated) Transfer in progress*1 Not communicating Error acquiring Eye-Fi card information*2 *1 Power saving (=32) on the camera is temporarily disabled during image transfer. *2 Restart the camera. Repeated display of this icon may indicate a problem with the card. Images labeled with a [ ] icon have been transferred. • Choosing [ ] mode will interrupt the Eye-Fi connection. Although the Eye-Fi connection will be restored after you choose another shooting mode or enter Playback mode, the camera may transfer any movies made in [ ] mode again. Checking Connection Information Check the access point SSID used by the Eye-Fi card or the connection status, as needed. zzPress the button, choose [Eye-Fi Settings] on the [3] tab, and then press the button. zzChoose [Connection info], and then press the button. XXThe connection information screen is displayed. Disabling Eye-Fi Transfer Configure the setting as follows to disable Eye-Fi transfer by the card, if necessary. Choose [Disable] in [Eye-Fi trans.]. zzPress the button, choose [Eye-Fi Settings] on the [3] tab, and then press the button. zzChoose [Eye-Fi trans.], and then choose [Disable]. • [Eye-Fi Settings] is not shown unless an Eye-Fi card is in the camera with its write-protect tab in the unlocked position. For this reason, you cannot change settings for an inserted Eye-Fi card if the write-protect tab is in the locked position. Cover Preliminary Notes and Legal Information Contents: Basic Operations Basic Guide Advanced Guide 1 Camera Basics 2 Using GPS Function 3 Auto Mode/ Hybrid Auto Mode 4 Other Shooting Modes 5 P Mode 6 Tv, Av, and M Mode 7 Playback Mode 8 Wi-Fi Functions 9 Setting Menu 10 Accessories 11 Appendix Index 171