Canon Speedlite 600EX-RT Instruction Manual - Page 59
Fully Automatic Wireless Flash Shooting - transmitter
View all Canon Speedlite 600EX-RT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
a: Fully Automatic Wireless Flash Shooting This section describes basic fully automatic wireless shooting when using a 600EX-RT attached to the camera (master) and a 600EX-RT wirelessly controlled (slave). Autoflash Shooting Using One Slave Unit 1 Set the master unit. Set the 600EX-RT attached to the camera as the master unit (p.52). You can also use a Speedlite Transmitter ST-E3-RT (sold separately) as the master unit. 2 Set the slave unit. Set the 600EX-RT to be controlled wirelessly as the slave unit (p.52). Set A, B or C as the firing group. The flash will not fire if it is set to D or E. 3 Check the channel and ID. If the channels and IDs of the master unit and slave unit are different, set them to the same numbers (p.53, 54). 4 Position the camera and the flash. Position them within the range shown on page 48. 57