Canon Speedlite 600EX-RT Instruction Manual - Page 60
Set the flash mode to <, >., Check the transmission status, and that the flash is ready., Check
View all Canon Speedlite 600EX-RT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
a: Fully Automatic Wireless Flash Shooting 5 Set the flash mode to . Press the button on the master unit and set the flash mode to . The slave unit is set automatically to during shooting via the control from the master unit. To also fire the master unit, set the master flash firing to ON (p.55). 6 Check the transmission status and that the flash is ready. Check that the lamp is lit in green. When the slave flash is ready, the AF-assist beam emitter blinks at 1-second intervals. Check that the slave flash-ready icon is lit on the master unit's LCD panel. When the recycling of all the flash units is completed, the master unit's flash-ready lamp lights. 7 Check the operation. Press the master unit's test flash button. X The slave unit flashes. If the slave unit does not fire, check that it is placed within the operation range. 8 Take the picture. Set the camera and take the picture, in the same way as with normal flash shooting. X If a standard flash exposure was obtained, the flash exposure confirmation lamp lights for 3 sec. 58