Canon Speedlite 600EX-RT Instruction Manual - Page 84
Check the operation.
View all Canon Speedlite 600EX-RT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
a: Fully Automatic Wireless Flash Shooting 3 Check the transmission channel. If the channels of the master unit and slave unit are different, set them to the same number (p.78). 4 Position the camera and the flash. Position them within the range shown on page 76. 5 Set the flash mode to . Press the button on the master unit and set the flash mode to . The slave unit is set automatically to during shooting via the control from the master unit. To also fire the master unit, set the master flash firing to ON (p.79). 6 Check that the flash is ready. Check that the master flash-ready lamp is lit. When the slave flash is ready, the AFassist beam firing area blinks in intervals of 1 second. 7 Check the operation. Press the master unit's test flash button. X The slave unit flashes. If the slave unit does not fire, check that it is placed within the operation range. 8 Take the picture. Set the camera and take the picture, in the same way as with normal flash shooting. X If a standard flash exposure was obtained, the flash exposure confirmation lamp lights for 3 sec. 82