Canon Speedlite 600EX-RT Instruction Manual - Page 99
C.Fn-06, Quickflash with continuous shot, C.Fn-07, Test firing with autoflash, C.Fn-08, AF-assist
View all Canon Speedlite 600EX-RT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
C: Setting Custom Functions C.Fn-06: + (Quickflash with continuous shot) You can set whether or not to fire the flash in continuous shooting while the flash-ready lamp is lit green (before the flash is fully charged). 0: OFF (Disabled) 1: ON (Enabled) When Quick Flash is fired during continuous shooting, underexposure may occur since the effective flash range becomes shorter. Setting 1 is recommended only when you want to shorten the effective flash range during short distance shooting. C.Fn-07: , (Test firing with autoflash) You can change the flash output when firing the test flash in E-TTL II/ E-TTL/TTL autoflash mode. 0: 1/32 (1/32) 1: 1/1 (Full output) C.Fn-08: - (AF-assist beam firing) 0: ON (Enabled) 1: OFF (Disabled) The AF-assist beam is not fired from the Speedlite. 97