Canon imagePROGRAF TM-300 MFP T36 SmartWorks MFP - User Manual v3.00 - Page 104
Network Mode, Scan to Folder
View all Canon imagePROGRAF TM-300 MFP T36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Network Mode SmartWorks MFP software saves scan data to the defined scan folder. If that folder is located on another networked PC then the time taken to save the scan data is dependent on the size of the file, the speed and available bandwidth of the network. Network mode = Buffered (Default) The software checks the location of the scan folder, and if it is located on a network drive, the scan data is buffered on the SmartWorks MFP PC. On completion of the scan, and any preview editing, the software will then transfer the complete scan file across the network to the remote PC displaying a "Please Wait" message. This means the software is not busy waiting for the network drive during the actual scan and preview editing operations. Network Mode = Direct The software writes directly to the defined folder without checking its location. This can reduce the overall time, but can also result in the software appearing unresponsive while waiting for data to transfer during the operation. Scan to Folder This defines the Default Scan Folder. The scan folder used is defined by the following priority list, with highest priority first. (This information is visible on the home screen). 1. If Users Accounts are enabled: A "User" can select his own Scan folder. Version 3.00 104 Global Scanning UK Ltd © 2018