Canon imagePROGRAF W6400 HDI-E.pdf - Page 17

imagePROGRAF HDI Driver Guide Setting Up a Print Job Graphics Settings Use these settings to adjust the print mode and resolution. 1. Click the Vector Graphics below Graphics. The Device and Document Settings sheet opens and switches to the display that presents the graphics settings. 2. Select either Color or Monochrome. 3. Select a setting for Color Depth from the list. Color Depth presents the following items for selection. Mode Color Monochrome Setting Details 16777216 (24-bit) colors 256 (8-bit) colors 2-Level grayscale 256-Level grayscale 16777216-Level grayscale 4. Move the Res. slider to adjust the settings. Res. presents the following items for selection. Resolution 300 dpi 600 dpi Setting Details Print speed is faster due to the lower resolution setting. Printing time is shorter and not as much computer memory is required. Print speed is slower due to the higher resolution setting. Achieves the best printing results, but printing time is longer and a large amount of computer memory is required. 5. Click the OK button. Custom Properties Settings Use the Custom Properties settings to perform special settings for the HDI driver. For more details, please refer to "Opening the Custom Properties Dialog Box" (p.3-5) and "Custom Properties Dialog Box Functions" (p.3-5). 3-4