Canon imagePROGRAF W6400 HDI-E.pdf - Page 22

imagePROGRAF HDI Driver Guide Setting Up a Print Job 3. Click the OK button. Important If you make the margin (white space) too small, this could disturb the print image or cause the printhead to scour the surface of some types of media. If the printhead scours the surface of the media, adjust the height of the printhead. Media Thickness Use these settings to adjust Media Thickness for the type of media and whether it is thin or thick. 1. Select a thickness setting from the Media Thickness list in the Media Detailed Settings dialog box. Media Thickness presents the following items for selection. Media Thickness Printer Default Thick Standard Thin Setting Details This item resets the value to the printer default settings. Select this item when thick paper is loaded in the printer, or when the printhead is scouring the surface of the media. Select this item when printing on media or paper of normal thickness without any problem. Select this item when printing on thin paper, or the printout is not clear and distinct. 2. Click the OK button. Vacuum Strength Select a setting for the amount of suction applied to the media. 1. Select a setting from the Vacuum Strength list in the Vacuum Strength dialog box. Vacuum Strength presents the following items for selection. Vacuum Strength Printer Default Strongest Strong Standard Weak Setting Details This item resets the value to the printer default settings. Select this setting if the paper is floating off the path with the "Strong" setting selected. Select this setting when curl in the media is causing it to float off the path. Select this setting when you are not experiencing problems. Select this setting when printing on thin paper and the quality at the corners of the sheet is poor. 2. Click the OK button. 3-9