Canon imagePROGRAF iPF650 iPF650 655 750 755 Basic Guide Step3 - Page 6

Reinstalling the Printer The basic workflow for reinstalling the printer is as follows. For detailed instructions, see the Setup Guide. Assemble the stand (optional with the iPF650 and iPF655) • The Stand must be assembled by at least two people on a flat surface. Attempting assembly by yourself poses a risk of injury or bending the Stand. • When assembling the Stand, lock the casters. • Before moving the assembled stand, lift the support rod to the a position shown (a) and unlock all four casters. Moving the stand with the support rod lowered or the casters locked may cause injury or damage the area of installation or basket cloth. OFF Referring to the Printer Stand Setup Guide, assemble the Stand. Install the printer • The iPF750 or iPF755 alone weighs approximately 52 kg (115 lb), and the iPF650 or iPF655, 43 kg (95 lb). Moving the printer requires at least three people. Be careful to avoid back strain and other injuries. • When moving the printer, firmly grasp the Carrying Handles. The printer may be unsteady if you hold it at other positions, which poses a risk of injury from dropping the printer. Mount the printer on the assembled Stand (optional with the iPF650 and iPF655) and tighten the screws firmly. 6