Casio CW-75 User Guide - Page 59

Part 10 - Connecting to a Computer Your printer comes bundled with a CD-ROM that contains the "DISC TITLE PRINTER" label layout software, which allows you to create original labels on your computer. Then you can use the bundled USB cable to connect the printer to your computer and print the labels. Important! • In this manual, the term "label layout software" refers to the DISC TITLE PRINTER application. • See the separate DISC TITLE PRINTER Application User's Guide on the CD-ROM for information about using the label layout software. To connect the printer to your computer 1. Install the label layout software on your computer. • See the separate Installation Guide and the DISC TITLE PRINTER Application User's Guide on the CD-ROM. 2. Load batteries into the printer or connect the optionally available AC adap- tor for power. • See page 15 of this manual for more information. 3. Make sure that the printer is turned off. • If the printer is turned on, press ] to turn it off. 4. Connect the USB cable that comes with the printer to your computer's USB port. Important! • Connect the cable directly to one of your computer's USB ports. Hub connection or other indirect connection can cause misoperation of the printer. • Before using the printer's USB port for the first time, you will need to remove the sticker that covers it. 5. Connect the other end of the USB cable to the printer's USB port. Make sure that the side of the connector marked with an arrow is facing downwards. 6. On the printer, press [ to turn it on. 7. On your computer, create the label and execute the print command. • Before printing, press the printer's COMPUTER LINK button so the message "READY TO TRANSFER DATA" is on the display. 57 E