Cisco 7910G User Guide - Page 37
Forward All Calls, Pick Up Calls, Place a Conference Call
UPC - 746320680316
View all Cisco 7910G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Forward All Calls To forward all incoming calls to another number, use the following method: 1. Press the CFwdALL soft key. You hear a confirmation beep. 2. Dial the number to which you want to forward all your calls. Dial the number exactly as you would if you were placing a call to that number. Remember to include locally required prefix numbers. The phone display is updated to show that calls are to be forwarded. 3. Press the pound key (#) or the EndCall soft key. Note To forward calls to a speed-dial number, use the soft key and button sequence of the CFwdALL soft key plus a speed-dial button, followed by the EndCall soft key. To cancel call forwarding, use one of the following methods: • Select the line that has call forwarding set. • Press the CFwdALL soft key then hang-up. Pick Up Calls To pick up a call that is on hold or a call that is ringing at another extension, use the following method: 1. Press the PickUp soft key. 2. Dial the extension number of the Cisco Unified IP phone that you want to pick up. Control of the call is transferred to your phone. To selectively pick up a call coming in to a number that belongs to a pickup group, use one of the following methods: • Press the GPickUp soft key. If there is only one pickup group defined in the entire Cisco Unified CallManager Express system, control of the call is transferred to your phone. • If the ringing telephone and your phone are in the same pickup group, press the asterisk (*) to transfer control of the call to your phone. • If the ringing telephone and your phone are in different pickup groups, dial the pickup group number where the phone is ringing to transfer control of the call to your phone. Place a Conference Call To place a conference call, use the following method: 1. During a call, press the More soft key and then the Confrn soft key to open a new line and put the first party on hold. 2. Place a call to another number. 3. When the call connects, press Confrn again to add the new party to the call. To establish a conference call between second- and third-party calls already present on a phone, using separate line buttons, one active and the other on hold, use the following method: 1. Press the Confrn soft key on the phone. 2. Press the Line button of the call you want to add to the three-party conference. End a Conference Call To end the conference call, hang up the handset, or press the EndCall soft key. Note If configured, once the conference call initiator disconnects, the conference call is terminated. Alternate Methods to End a Conference Call Call initiators may use one of the following methods (Functionality varies according to your system configuration.): 37