Cisco 7985G Administration Guide - Page 64

Chapter 3 Setting Up the Cisco Unified IP Phone Installing the Cisco Unified IP Video Phone Mounting the Handset Bracket Step 1 Step 2 Step 3 Step 4 Slide the handset bracket into the tracks as shown on Figure 3-2. Make sure to push it firmly into the tracks until it snaps into place. The handset cable will have a longer straight section at one end versus the other. The end should be used to connect the handset cable to the underside of the video phone. Run this straight section of the handset cable through the channel groove on the underside of the phone from the plug to the handset cradle. Place the phone in an upright position and lay the handset in its place. Magnets hold the handset in place. Figure 3-2 Cisco Unified IP Video Phone 7985G Cable Connections OL-8726-02 Cisco Unified IP Video Phone 7985G Administration Guide 3-9