Cisco 7985G Administration Guide - Page 76
Scroll to the SW Port Configuration, Auto Negotiate
UPC - 882658054020
View all Cisco 7985G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Chapter 4 Configuring Settings on the Cisco Unified IP Video Phone Network Configuration Menu Table 4-2 Network Configuration Menu Options (continued) Option DHCP Enabled Alternate TFTP SW Port Configuration Description To Change Indicates whether DHCP is being used by the phone. 1. Unlock network configuration options. 2. Scroll to the DHCP Enabled option and press the No softkey to disable DHCP, or press the Yes softkey to enable DHCP. 3. Press Save. Indicates whether the phone is using an alternative TFTP server. 1. Unlock network configuration options. 2. Scroll to DHCP Enabled option and press Yes. 3. Scroll to the Alternate TFTP option and press Yes if the phone should use an alternative TFTP server. Otherwise, press No. 4. Press Save. Speed and duplex of the network 1. Unlock network configuration options. port (labeled 10/100 SW). The following valid values apply: 2. Scroll to the SW Port Configuration option and then press Edit. • Auto Negotiate 3. Scroll to the setting that you want and • 10 Half-10-BaseT/half then press Select. duplex 4. Press Save. • 10 Full-10-BaseT/full duplex • 100 Half-100-BaseT/half duplex • 100 Full-100-BaseT/full duplex If the phone is connected to a switch, configure the port on the switch to the same speed/duplex as the phone or configure both to auto-negotiate. OL-8726-02 Cisco Unified IP Video Phone 7985G Administration Guide 4-10