Cisco ASR1002-10G-VPN/K9 Software Guide - Page 187
Step 14, Upgrade the ESP Base subpackage.
View all Cisco ASR1002-10G-VPN/K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
Chapter 4 Software Upgrade Process Upgrade Process With Service Impact for Nonredundant Platforms Step 14 Command or Action request platform software package install rp 0 file file-system:asr1000rp1-esp*version*.pkg force Purpose Upgrade the ESP Base subpackage. Example: Router# request platform software package install rp 0 file bootflash:asr1000rp1-esp*02.02.01.122-33.XNB1*. pkg force Step 15 request platform software package install rp 0 file file-system:asr1000rp*version*.pkg Example: Router# request platform software package install rp 0 file bootflash:asr1000rp*02.02.01.122-33.XNB1*.pkg Upgrade all subpackages, including the RPBase subpackage, which is the last subpackage that needs to be upgraded. Note This step is required to ensure that all subpackages on the router were upgraded as part of this procedure, and might upgrade some subpackages that would otherwise be missed in the process. Step 16 show version installed Example: (Optional) Verify that the subpackages are properly installed. Router# show version installed Step 17 reload Reload the RP. Example: Router# reload Tip The router will continue normal operation even without a reload, so you can reload the router during scheduled maintenance or a slower traffic period. Step 18 request platform software package clean (Optional) Removes the unused subpackages from the router. Examples The following example shows the software upgrade for Cisco ASR 1002 or 1004 Router running sub-packages: Router# show version Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 12.2(33)XNA, RELEASE SOFTWARE (fc1) System image file is "bootflash:packages.conf" cisco ASR1004 (RP1) processor with 752142K/6147K bytes of memory. 5 Gigabit Ethernet interfaces 2 Serial interfaces 32768K bytes of non-volatile configuration memory. 4194304K bytes of physical memory. 937983K bytes of eUSB flash at bootflash:. 39004543K bytes of SATA hard disk at bootflash:. 253424K bytes of USB flash at usb0:. Configuration register is 0x2102 Router# show version installed OL-16506-10 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-125