Cisco ASR1002-10G-VPN/K9 Software Guide - Page 57

Chapter 3 Consolidated Packages and SubPackages Management Managing and Configuring the Router to Run Using Consolidated Packages and Individual SubPackages Installing an Optional SubPackage Note If you install the Cisco WebEx Node for ASR 1000 Series SPA before the software subpackage is installed, you will receive the error message %ASR1000_RP_SPA-3-MISSING_SPA_PKG_ERR. This message will resolve once you download and install the appropriate sipspawma subpackage and then reload the router in individual subpackage mode. To run the router using an optional subpackage, perform the following steps for each RP in the system: Step 1 Step 2 Step 3 Step 4 Step 5 Verify that the RP is running in individual subpackage mode and was booted from a provisioning file. For more information, see the "Managing and Configuring a Router to Run Using Individual SubPackages From a Consolidated Package" section on page 3-10. Verify that the version of the optional subpackage that you want to install is the same version as the software running on the active RP. Download the optional subpackage that you want to install. Optional subpackages must be downloaded independently from consolidated packages for the Cisco ASR 1000 Series Routers. On each RP, copy the optional subpackage to the directory where any other individual subpackages and the provisioning file is located. Run the request platform software package install rp file command, as shown in the following example. Note Do not use the optional slot or bay keywords for the initial installation. Router# request platform software package install rp 0 file bootflash:asr1000rp1-sipspawmak9.BLD_V122_33_XND_ASR_RLS4_THROTTLE_LATEST_20090511_042308. pkg --- Starting local lock acquisition on R0 --- Finished local lock acquisition on R0 --- Starting file path checking --Finished file path checking --- Starting image file verification --- Checking image file names Verifying image file locations Locating image files and validating name syntax Found asr1000rp1sipspawmak9.BLD_V122_33_XND_ASR_RLS4_THROTTLE_LATEST_20090511_042308.pkg Inspecting image file types Processing image file constraints Creating candidate provisioning file WARNING: No package of type sipspawmak9 is installed. WARNING: Package will be installed for all SIP slots and bays. Finished image file verification --- Starting candidate package set construction --- Verifying existing software set Processing candidate provisioning file Constructing working set for candidate package set Constructing working set for running package set Checking command output Constructing merge of running and candidate packages Checking if resulting candidate package set would be complete Finished candidate package set construction --- Starting compatibility testing --Determining whether candidate package set is compatible OL-16506-10 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 3-15