Cisco ESW-520-48P-K9 Software Guide - Page 146
TFTP Download Command Variables, Required Variables, Optional Variables
View all Cisco ESW-520-48P-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Disaster Recovery with TFTP Download Appendix C ROM Monitor TFTP Download Command Variables This section describes the system variables that can be set in ROM monitor mode and that are used during the TFTP download process. There are both required variables and optional variables. Note The commands described in this section are case sensitive and must be entered exactly as shown. Required Variables These variables must be set with these commands before you use the tftpdnld command: Variable Command IP address of the router. IP_ADDRESS= ip_address Subnet mask of the router. IP_SUBNET_MASK= ip_address IP address of the default gateway of the router. DEFAULT_GATEWAY= ip_address IP address of the TFTP server from which the TFTP_SERVER= ip_address software will be downloaded. Name of the file that will be downloaded to TFTP_FILE= filename the router. Optional Variables These variables can be set with these commands before using the tftpdnld command: Variable Command Configures how the router displays file download progress. TFTP_VERBOSE= setting 0-No progress is displayed. 1-Exclamation points (!!!) are displayed to indicate file download progress. This is the default setting. 2-Detailed progress is displayed during the file download process; for example: • Initializing interface. • Interface link state up. • ARPing for 1.4.0.1 • ARP reply for 1.4.0.1 received. MAC address 00:00:0c:07:ac:01 Cisco Secure Router 520 Series Software Configuration Guide C-4 OL-14210-01