Cisco SPA508G Administration Guide - Page 160

Provisioning Manually Provisioning a Phone from the Keypad 6 STEP 4 Email the CSR (in zip file format) to the Cisco support person or to [email protected]. The certificate is signed by Cisco and given to you. Manually Provisioning a Phone from the Keypad Typically Cisco SPA IP phones are configured to be provisioned when first connected to the network and at configured intervals that are set when the phone is preprovisioned (configured) by the service provider or the VAR. Service providers can authorize VARs or advanced users to manually provision Cisco SPA IP phones by using the phone keypad. The status of the provisioning process is indicated by the phone mute button blinking in the following patterns: • Red/orange slow blink (1.0 seconds on, 1.0 seconds off): Contacting server, server not resolvable, not reachable, or down. • Red/orange fast blink (0.2 seconds on, 0.2 seconds off, 0.2 seconds on, 1.4 seconds off): Server responded with file not found or corrupt file. To manually provision the phone by using the keypad: Cisco SPA303 and Cisco SPA5XXG STEP 1 Press Setup, then scroll to Profile Rule. STEP 2 Enter the profile rule by using the following format: protocol://server[:port]/profile_pathname For example: tftp://192.168.1.5/spa504.cfg If no protocol is specified, TFTP is assumed. If no server-name is specified, the host that requests the URL is used as the server name. If no port is specified, the default port is used (69 for TFTP, 80 for HTTP, or 443 for HTTPS). STEP 3 Press the Resync softkey. Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 159