Cisco SPA508G Administration Guide - Page 210

Configuring LED Patterns 9 u=on/off/on/off/etc. This is a user-defined blinking pattern used only when p = ud. It consists of up to 4 pairs of on/off duration in seconds with up to 2 decimal places; each value is separated by a forward slash (/). LED Script Examples c=r;p=sb Color is red and pattern is slow blink. c=o LED is off. c=g Color is green and pattern is steady on (default). c=a;p=ud;u=.1/.1/.1/.1/.1/.9 Color is amber (orange) and the blink pattern is: 100ms on, 100ms off, 100ms on, 100ms off, 100ms on, 900ms off LED Pattern The administrator can also specify a different color and pattern for each of the following states of the call appearance. • Idle: This call appearance is not in use. It can be used to make outbound call on this phone • Local Seized: This call appearance has been seized by this phone to prepare for an outbound call • Local Progressing: This phone is making an outbound call that is progressing • Local Active: This phone is engaged in a connected call on this call appearance • Local Ringing: This phone is ringing for an incoming call on this call appearance • Local Held: This phone has placed this call appearance on hold Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 209