Cisco SPA508G Administration Guide - Page 318

Cisco SPA IP Phone Field Reference Attendant Console Tab (Cisco SPA500 Series) A Parameter Test Mode Enable Attendant Console Call Pickup Code BLF List URI Unit 1 Key 1-32 Call Pickup Audio Notification Description Enables or disables test mode. When test mode is enabled, the LEDs are turned on when keys are pressed, going from off to green to red, and back to off. In test mode, when all the buttons on the Cisco SPA500S are returned to off, all the keys become orange. The IP phone must be rebooted after the test is completed. The star code used for picking up a ringing call. Defaults to *98. Automatically configures Busy Lamp Field (BLF) subscriptions for all users on a monitored list. See Configuring BroadSoft Busy Lamp Field AutoConfiguration. Enter a strings that define the extension and other parameters associated with each lighted button on the first Cisco Attendant Console. Keywords and values are case-sensitive. The configuration script is described in the Unit/Key Configuration Scripts. By default, this parameter is set to no. If you set it to yes, the phone plays the Call Pickup tone when there are incoming calls to any of the lines that the user is monitoring with the Call Pickup function. Use the following in your configuration file: Yes For more information, see Chapter 9, "Configuring the Cisco Attendant Console.". Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 317