Cisco VG202 Hardware Installation Guide - Page 40
Warning, Step 1, Connecting an FXS Line
View all Cisco VG202 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Connecting Cables Chapter 3 Installing Cisco VG202 and Cisco VG204 Voice Gateways Warning For connections outside the building where the equipment is installed, the following ports must be connected through an approved network termination unit with integral circuit protection: FXS. To connect the FXS line, follow these steps: Step 1 Connect one end of the straight-through RJ-11 cable to the FXS port. Figure 3-8 shows an FXS line connection. Figure 3-8 Connecting an FXS Line 1 FastEthernet 0/1 0/0 CONSOLE AUX VG204 FXS 0/3 0/2 0/1 0/0 12V DC SA 272271 2 3 1 FXS port 3 RJ-11 port Fax machine or telephone 2 RJ-11 cable Step 2 Connect the other end of the cable to the RJ-11 port on the telephone or fax machine. 3-12 Cisco VG202 and Cisco VG204 Voice Gateways Hardware Installation Guide OL-15959-01