Clifford Concept 650MkII Owners Guide - Page 14

G919730P_01-07.qxd 1/12/07 3:38 PM Page 11 transmitter sensor disable To temporarily disable a sensor input, arm the system, press twice and then . The lights will flash four times and all warn away trig- ger zones one, two, three, and eight are bypassed. Press the buttons again; the lights flash four times and both warn away and full trigger zones one, two, three, and eight are bypassed until the system is dis- armed. This can be performed anytime the system is armed. 1. Arm the system. 2. Press twice and then . 3. The lights will flash four times; all warn away zones are now bypassed. 4. Transmit the sensor bypass channel again. (Press and then .) twice 5. The lights will flash four more times; the sensor warn away and full trigger zones are now bypassed. 6. The sensor zones will reset when disarmed. intellistart and smartwindows sensor bypass When the system sees a command to start the vehicle via the Intellistart, it bypasses sensor zones and will continue to bypass these zones until the remote start shuts down. When the system sees a SmartWindows command for up or down operation, the unit will automatically bypass sensor zones one, two, three, and eight until the windows complete their operation. © 2004 directed electronics, inc. 11