Clifford Concept 650MkII Owners Guide - Page 16

G919730P_01-07.qxd 1/12/07 3:39 PM Page 13 3. After the last digit of the pin code is entered: a. To disarm the system: press and release . b. To enter valet mode: Press and hold for three seconds. The LED status indicator will illuminate continuously if you are entering Valet Mode and will turn off if you are exiting Valet Mode. To exit Valet Mode: 1. Turn the ignition on. The system will then automatically exit Valet mode. transmitter valet mode The operations described in this section refer to transmitter buttons. Remember, the buttons used in all the instructions in this guide correspond to a Standard Configuration transmitter. This may not be how your transmitter is set up. To enter Valet Mode, press twice and then . The LED sta- tus indicator will illuminate continuously if you are entering Valet Mode, or will turn off if you are exiting Valet Mode. © 2007 directed electronics 13