Clifford Concept 650MkII Owners Guide - Page 33
auto-immobilisation sequence, one-time valet feature
View all Clifford Concept 650MkII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
G919730P_01-07.qxd 1/12/07 3:39 PM Page 30 auto-immobilisation sequence 1. Turn ignition off or disarm alarm 2. After 30 seconds the systems Immobilisation circuits activate and engage the starter and ignition interrupt 3. LED flashes at ½ normal speed Disarming auto-immobilisation To disarm auto-immobilisation when active, follow any of the sequences listed below. z Turn ignition on and press the arm/disarm button. z Arm the alarm and then disarm the alarm. z Turn the ignition on and enter the system valet/PIN code. one-time valet feature This feature allows the system to be put in valet mode only until the next time the ignition is turned on. (This feature is a Thatcham and EC requirement and, therefore is not programmable.) 30
30
auto-immobilisation sequence
1.
Turn ignition off or disarm alarm
2.
After 30 seconds the systems Immobilisation circuits activate
and engage the starter and ignition interrupt
3.
LED flashes at ½ normal speed
Disarming auto-immobilisation
To disarm auto-immobilisation when active, follow any of the
sequences listed below.
Turn ignition on and press the arm/disarm button.
Arm the alarm and then disarm the alarm.
Turn the ignition on and enter the system valet/PIN code.
one-time valet feature
This feature allows the system to be put in valet mode only until the
next time the ignition is turned on. (This feature is a Thatcham and EC
requirement and, therefore is not programmable.)
G919730P_01-07.qxd
1/12/07
3:39 PM
Page 30