Clifford Concept 650MkII Owners Guide - Page 28
G919730P_01-07.qxd, 12/07, 39 PM,
View all Clifford Concept 650MkII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
G919730P_01-07.qxd 1/12/07 3:39 PM Page 25 entry delay on/off z On: If the system has passively armed, it will not trigger for 15 seconds after a door is opened allowing the user to enter the vehicle and disarm the system via the PlainView 2 Valet switch. z Off: There is no entry delay when armed. The system will trigger instantly when a door is opened. reset all features to factory settings z All system settings (except PIN and remote programming) in the User Programming grid will be reset to their default factory setting as indicated in bold lettering. z Press the arm/disarm button of the TX; the siren will chirp twice as confirmation. auto start setting - off/battery only/temp only/battery and temp z This feature is only available with the IntelliStart* option. z Off: The vehicle will not autostart. z Battery: The vehicle will only autostart when the car battery voltage has dropped to a preset level. z Temperature: The vehicle will only autostart at a preset low temperature. z Battery and temperature: The vehicle will autostart with a low voltage car battery or low temperature. note: Temperature and battery calibration settings can only be made with the Cliffnet Wizard programming software. * This feature is not evaluated by Thatcham © 2007 directed electronics 25