Clifford Concept 650MkII Owners Guide - Page 37
blackjax* off warning indicator, system sensors and adjustments
View all Clifford Concept 650MkII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
G919730P_01-07.qxd 1/12/07 3:39 PM Page 34 5. Turn ignition off, siren chirps 3 times as confirmation of exiting programming. note: If ignition remains on after entering PIN code and no action for 10 seconds, unit will automatically exit programming mode without chirps. blackjax* off warning indicator Each time the ignition is turned off when BlackJax is bypassed the LED will flash 10 times as warning that the BlackJax has been temporarily bypassed. system sensors and adjustments Your system was installed with one of 3 different sensor configuration options. Either, Digital Dual Zone proximity sensor, Ultrasonic sensor, or Glass Tamper sensor & Tilt sensor. Tilt/Motion Sensor: The 507C sensor detects when the vehicle is being raised in an attempt to either remove the wheels/tires or tow the vehicle. This sensor is capable of learning the vehicle's initial angles of vertical and horizontal inclination each time the vehicle is parked. Proximity Sensor: The digital dual-zone proximity sensor uses digital signal processing to detect mass movement inside the passenger compartment and very near the vehicle. The sensor is impervious to air movement so it is ideal for use on convertible vehicles. * This feature is not evaluated by Thatcham 34