Clifford Matrix 3 Owners Guide - Page 13
disarming without a transmitter, remote controlled chirp muting - valet switch
View all Clifford Matrix 3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
➜ disarming without a transmitter This feature allows you to disarm the security system without the remote transmitter should it be lost, damaged or disabled. In order to disarm the system without a remote transmitter, you must have the vehicle's ignition key and know where the Valet switch is located. Be sure to check with the installer for the location and the number of presses of the Valet switch required to disarm the system. To disarm the security system, turn the ignition to the "on" position. Press the Valet switch the preset DRW-35 number of times (1-5 times) within 15 seconds. The system should now disarm. If it does not, you may have waited too long; turn the ignition off and on and try again. important! The unit can be programmed to respond to 1-5 pulses of the Valet switch for the disarm function. Be sure to check with the installer for the desired programming. Location of Valet Switch ➜ remote controlled chirp muting To temporarily turn off the arm or disarm siren chirps, use Remote Controlled Chirp Muting. Simply press on the transmitter for less than one second before arming or disarming, and the confirmation chirp(s) will be eliminated for that one op- eration only. If you want the arm/disarm chirps turned off permanently, your dealer can do this for you. 10 © 2001 directed electronics, inc.