Clifford Matrix 3 Owners Guide - Page 21

power saver mode Your system will automatically enter Power Saver Mode while armed or in Valet Mode after a period of time in which no operation has been performed. This lowers the current draw to prevent the system from draining the vehicle's battery. Power Saver Mode takes over under the following conditions: ➤ Power Saver when the system is armed: After the system has been armed for 24 hours, the LED will flash at half its normal rate, decreasing the system's current draw. ➤ Power Saver in Valet Mode: When the system enters Valet Mode the LED illuminates steadily. If the vehicle is not used (ignition is not turned on) for a period of one hour while the system is in Valet Mode, the LED will shut off. If the system remains in Valet Mode, the LED will come back on the next time the ignition is turned on and then back off. programming options Programming options control what your system does during normal operation, and require few or no additional parts. However, some may require additional installation labor. The following is a list of the program settings, with the factory settings in bold: ➤ Active arming (only with the transmitter) or passive arming (automatic arming 30-seconds after the last door is closed). 18 © 2001 directed electronics, inc.