Clifford Matrix 3 Owners Guide - Page 15

The LED status indicator will light steadily if you are entering Valet Mode and will turn off if you are exiting Valet Mode. ➜ remote controlled valet mode The operations described in this section refer to transmitter buttons. Remember, the buttons used in all the instructions in this guide correspond to a Standard Configuration transmitter. This may not be how your transmitter is set up. 1. Open any vehicle door. 2. Press . 3. Press . 4. Press again. The LED status indicator will light solid if you are entering Valet Mode, or will go out if you are exiting Valet Mode. ➜ false alarm control technology (FACT) Your system offers FACT, a feature that prevents annoying repetitive trigger sequences due to faulty door pin switches or environmental conditions such as thunder, jackhammers, airport noise, etc. Here's how it works: The alarm triggers three times. Each time, the same sensor or switch is triggering the alarm. The three triggers are within 60 minutes of each other. FACT will interpret this pattern of triggers as false alarms. After the third trigger, 12 © 2001 directed electronics, inc.