Clifford Matrix 3 Owners Guide - Page 28

Three minutes after the constant siren output begins, the flashing parking lights and the siren will stop. The starter interrupt will remain active until the system is disarmed. If the door is opened or the ignition is turned off and on in an attempt to restart the car, the siren and light flashing will begin again. ➜ disarming the VRS Take the time to familiarize yourself with the VRS triggering sequence and the disarm procedure. It is important to recognize and identify the VRS trigger sequence and know how to disarm it in case of accidental activation. Once the VRS is armed, it does not disarm automatically. You must disarm it the next time you operate the vehicle. You must disarm it with one of the following procedures: If the system has not entered the triggered sequence (siren has not started chirping): 1. Turn the ignition on. 2. Press the disarm button for one second. The lights will flash and the siren will chirp twice. If the system has entered the triggered sequence (the siren has begun chirping), pressing the disarm button of the transmitter will not disarm the VRS. To disarm the VRS during a VRS trigger sequence: © 2001 directed electronics, inc. 25