Clifford Matrix 3 Owners Guide - Page 18

this information in its memory, and continue to chirp four or five times each time it is disarmed, until the next time the ignition key is turned on. ➜ table of zones The zone number is the number of LED flashes used by the system to identify a specific input. The standard input assignments are listed below, along with spaces to write in any optional sensors or switches you have had installed. Zone - Number of LED Flashes Description Dealer-Installed Options 1 Instant trigger - often used for hood/trunk pinswitches 2 Instant trigger - a heavier impact detected by the shock sensor 3 Door switch trigger 4 Instant trigger - for optional sensors 5 Ignition trigger If the Warning Zone response is triggered, the LED will not report it. note: Your system stores the last two triggered zones in memory. If your system has been triggered but the LED has been reset by turning on the ignition, your dealer can still recall the last two zones that were triggered. Contact your dealer for details. © 2001 directed electronics, inc. 15