Cobra XRS 9770 XRS 9770 Manual - Page 13

Your Detector Settings Pop Alert The Pop Mode Radar Gun is a single-pulse Doppler radar that is a feature of a K and Ka (Bee III Ka radar gun) band Instant-On radar gun. It uses a single, short-time pulse to measure the target vehicle's speed. The Pop mode receiver senses Pop singles beyond the effective range of Pop radar guns. As the Pop mode receiver is so sensitive, you should limit the use of Pop Detect mode to highway and rural driving. Pop Alert will alert you to Pop radar signals. During the alert, the unit continues to detect other signals. The factory setting is Pop Detect Off. To Turn Pop Detect Mode On or Off Using Program Mode (See Page 7 For Instructions on Using Program Mode) In Program mode, go to Pop Detect. ToneVisual Two beeps Display Pop On Voice Pop On One beep Pop Off Pop Off Pop Detect On Pop On Pop Detect Off Pop Off K, Ku and X Band Detection The new Ku Band may be introduced to North America in the future. To prevent false alerts until it is, the factory default for Ku Band detection is Off. In parts of North America, annoying false alerts from door openers and similar devices are triggered on the X Band and K Band. If desired, X Band or K Band can be turned Off. The factory default for X Band and K Band detection is On. To Turn X, K and/or Ku Mode On or Off Using Program Mode (See Page 7 For Instructions on Using Program Mode) In Program mode, go to X, K or Ku band. X-Band On Tone Two beeps One beep Visual Display X-Band On X-Band Off X-Band On Two beeps K-Band On X-Band Off X-Band Off One beep Two beeps One beep K-Band Off Ku-Band On Ku-Band Off K-Band On K-Band On 20 English K-Band Off K-Band Off Ku-Band On Ku-Band On Ku-Band Off Ku-Band Off Your Detector Settings VG-2 Alert The detector is undetectable by VG-2 detection devices and will alert you when such a device is in use near your vehicle. During the alert, the unit continues to detect other signals. You can choose whether or not you want your unit to show VG-2 Alerts. With VG-2 Detect mode On, you can also choose whether or not you want your unit to sound audible VG-2 Alerts. The factory settings are VG-2 Detect Off and VG-2 Detect Audio Off. To Turn VG-2 Detect Mode On or Off Using Program Mode (See Page 7 For Instructions on Using Program Mode) In Program mode, go to VG-2 Detect. Tone Two beeps Visual Display VG2 On Voice VG2 On One beep VG2 Off VG2 Off VG-2 Detect On VG-2 Detect Off VG2 On VG2 Off To Turn VG-2 Audio Mode On or Off Using Program Mode (See Page 7 For Instructions on Using Program Mode) In Program mode, go to VG-2 Audio. Tone Two beeps Visual Display VG2 Audio On Voice VG2 Audio On One beep VG2 Audio Off VG2 Audio Off VG-2 Audio On VG-2 Audio Off ...Audio On ...Audio Off Nothing Comes Close to a Cobra® 21