Cobra XRS 9770 XRS 9770 Manual - Page 6

Your Detector EasySet Programming EasySet Programming • All user mode settings on your detector can be changed by using Program mode. When changing the settings, please keep in mind: g Buttons can have multiple functions. g All settings will be stored in memory when the power is turned Off and recalled when the power is turned back On. The procedure for using Program mode is shown on page 7. NOTE You cannot enter Program mode during an alert. The unit will not detect signals while in Program mode. During programming, if no buttons are pushed for ten seconds, the unit will automatically exit Program mode and save the last settings. Programming User Modes The tables on pages 8 through 9 show you how to program all user modes and the settings you can choose from. NOTE On the following pages, you will find more detailed explanations of each setting. See page 15 for instructions on setting the IntelliMute activation point. See page 18 for instructions on calibrating the compass. See page 23 for instructions on using SmartPower. 6 English Your Detector EasySet Programming Set/City Button Press and release Select/Dim Button Press and release Program/Mute Button Press and hold/Press and release To Use Program Mode Press and hold the Program/Mute button for two seconds. Tone Three beeps Visual Display Program will appear. PROGRAM Voice Start Program While the programming instructions are scrolling, press and release the Select/Dim button to cycle through the user modes. Then brief programming instructions will scroll through the display three times. One beep with As each mode is displayed, None each button the current setting for that press mode will be shown. With the user mode you wish to change displayed, press and release the Set/ City button to change the setting. One or two beeps, depending on your selection The setting you select will be shown. Current setting To move to the next selection, press the Select/Dim button again. When you have finished programming any or all of the user modes, press and release the Program/Mute button to exit Program mode. Or simply wait ten seconds without pushing any buttons. One beep When you exit Program mode, Exit Program the new setting will automatically be saved and EXIT PROGRAM and Settings Saved! will appear. EXIT Settings PROGRAM Saved! Nothing Comes Close to a Cobra® 7