Cobra XRS 9770 XRS 9770 Manual - Page 15

Your Detector Settings DigiView Data Display Brightness Your detector has a Bright display mode (for daytime driving) and three levels of Dim display modes (Dim for dusk driving, Dimmer for night driving and Dark where no visual alerts will be displayed) to control the display's brightness levels. The factory setting is Bright. The factory Dim mode default setting is Dimmer. Dark Indicator . Select/Dim Button To Change the Brightness to Dim Press and release the Tone Select/Dim button once. Two beeps Dim Display Dim Dimmer Display Dimmer Visual Display Dim, Dimmer or Dark Dark Display Dark Voice Dim, Dimmer or Dark NOTE When you change to Dim mode, the unit will enter whichever dim default mode is set at the time. To Change the Brightness to Bright Press and release the Tone Select/Dim button again. One beep Bright Display Bright Visual Display Bright Voice Bright 24 English Your Detector Settings Setting Dim Default You can set the default level for Dim mode (Dim, Dimmer or Dark) either in Program mode or directly using the Select/Dim button. Select/Dim Button Dim Press Dark and hold Select/Dim button Dimmer To Set the Display Dim Mode Default Directly Using the Set/Dim Button Press and hold the Select/ Tone or Voice Dim button. One beep each time the display cycles Visual Display Cycles - see chart above Release the Select/ None Dim button to select the current display as default. Dim, Dimmer or Dark To Set the Display Dim Mode Default Using Program Mode (See Page 7 For Instructions on Using Program Mode) In Program mode, Tone go to Display Dim, Dimmer or Dark. Two beeps One beep Visual Display Dim Dimmer Voice Dim Dimmer One beep Dark Dark Nothing Comes Close to a Cobra® 25