Cobra XRS 9770 XRS 9770 Manual - Page 9

Your Detector Settings Muting an Alert Your detector allows you to quickly turn Off an Audio Alert by momentarily pressing the Program/Mute button. If you press the Program/Mute button a second time during the Alert, the Audio Alert will be turned back On. Program/Mute Button Press and release To Turn On or Off an Audio Alert Using the Program/Mute Button Press and release Tone the Program/Mute button. None Visual Display None Auto Mute Mode Auto Mute will automatically reduce the audio volume of all alerts after four seconds for as long as the signal is detected. The factory setting for Auto Mute is On. To Turn Auto Mute On or Off Using Program Mode (See Page 7 For Instructions on Using Program Mode) In Program mode, go to Auto Mute. Tone Two beeps Visual Display Auto Mute On One beep Auto Mute Off Voice Auto Mute On Auto Mute Off Auto Mute Off Auto Mute On AutoMute On AutoMute Off 12 English Your Detector Settings Voice Alert and Tone Alert Modes You can set your detector to sound alerts and confirm user settings with either a Voice or a Tone. The factory setting for Alert mode is Voice. To Select Voice or Tone Mode Using Program Mode (See Page 7 For Instructions on Using Program Mode) In Program mode, go to Voice/Tone. Tone One beep Visual Display Tone Voice Alert Voice Voice Tone Alert Voice Alert Auxiliary Audio Jack The Auxiliary Audio Jack can be used to connect an external speaker in environments with high ambient noise levels. The internal speaker will be disconnected. Auxiliary Audio Jack Nothing Comes Close to a Cobra® 13