Coby CT-P8700 Operation Guide - Page 14

MESSAGE WAITING If you subscribe to voice mail from the telephone company and if there are voice message that have been left in your voice mailbox, the display will show"MSG WAITING" (see note below) rise tdAITIMG 9 02,2/25- 0 - 39 Note: This function requires voice mail subscription from the local telephone company. Furthermore, the localphone company must provide a type of voice mail signaling called "FSK" (Frequency Shift Key) Not all telephone companies have the visual message waiting feature available. Please contact your local telephone company to check if this is available in your area. Tip: If you wish to delete the "Message Waiting" message, delete it as described in the handset settings section "Deleting the Message Waiting Indication" (see page 16). New Call Light When you received a Caller ID message or voice mail message, the New Call light will flash. • For Caller ID ,the New Call light will flash to indicate that you have a new Caller ID call stored in memory. • When you have a voice message waiting the New Call light will also flash. CALL TRANSFER Call Transfer/Three-way Calling The CT-P8700 is designed for easy communication between the handset and base speakerphone. You can transfer a call from one to the other, or you can have a three-way call between the handset, base,and a caller. Use the three-way calling function When there is a incoming call, 1. Press the .,„„0 key on the base to connect the call. 2. If you want to start the intercom between the base and one of the handsets, press key and then use the dial pad on the base to select the handset number you want to connect. c4 3. When the handset receive the sign from the base, it will ring, then press PAGING 4. Press ,TALK button to actualize the three-way call. 3-kliziy CALL Transfer from the handset to another handset: If a handset is in TALK mode, press -Okey at the current handset, then press a handset number, the other handset you have indicated just will ring, and current handset will return back to standby mode, the other handset can pick up the line in 20 seconds by pressing the STALK button. OTHER FEATURES Using the Intercom/Handset Finder(PAGE) From the handset: 1.Press @®m" [Option/ICM] on the left side of the handset. If the phone is in range, the phone will beep for up to 20 PAGING seconds. -0 7 2.Press the [ICM/TRANS] on the base, which enables the base to intercom with the handset. ICII 3.Press either intercom key to end the intercom connection. 7 From the base: 1.Press [ICM/TRANS] on the base. I f the phone is in range, the phone will beep for up to 20 seconds. PAGING 2.Press the * O"" [Option/ICM] on the left side of the handset, which enables the handset to intercom with the base. Press the 0TALK key or place the handset in the base to stop the handset page/find feature. 3.Press either intercom key to end the intercom connection. Note: If a call is received while the unit is in the intercom mode, the intercom connection is automatically disconnected. Out-of-Range Warning If you venture too far from the base, the handset will beep and the display will show "OUT RANGE". Reverse your direction to re-establish connection with the base or the call will be dropped. When the base detects that the handset has been out of range for 20 continuous seconds it will release the engaged line. If you try to access the line when the handset is out of range the base. The display will show "TRY AGAIN". Channel Changing If you are experiencing interference during a telephone call, press the cK [CH] key. The CT-P8700 will scan up to 40 channels and select the clearest one to provide the best possible reception. If the current channel is the clearest available channel, it will keep you on that channel. 26